0769-23388351
Toggle Navigation
Just now, I saw an interesting topic of magnets. Some people asked if the magnets are waterproof? Some said they were waterproof, and some said they were not waterproof. Let me share with you below.
Are Rare Earth (NDFEB) Magnets Waterproof?
The picture shows NdFeB strong magnetic waterproof encapsulated magnet
Normally neodymium strong magnets are not waterproof, although magnets are usually coated with a protective layer such as nickel copper nickel, zinc or epoxy to prevent rust and moisture corrosion, they are not waterproof, neodymium magnets can get wet or submerged for a short period of time , especially in the case of poor coating treatment.
Are ceramic ferrite magnets waterproof?
The ferrite magnets waterproof is no problem and can work underwater for a long time.
Nowadays, some customers still want neodymium magnet material, and the magnet manufacturers use the method of encapsulation (wrapping iron iron boron) or compress the high frequency of the magnet with PVC to isolate the magnet from air and water for waterproof purposes.
The above article was originally created by Xiaofu, a Courage magnet manufacturer in China. If there is any similarity, it is purely plagiarism!
Recommended waterproof neodymium magnet products;
Color encapsulated plastic coated magnets
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....