0769-23388351
Toggle Navigation
If you have any questions about magnets, go to the Magnet FAQ section of the Courage Magnet website. We have compiled more than 300 FAQs about magnets. Today, the 20x5mm magnet that the website is concerned about can absorb several kilograms.
Judging from the magnet specifications proposed by this netizen, it can be known that this is a round magnet with a diameter of 20mm and a thickness of 5mm. Since the specific magnet material and grade are not specified, the following describes the ferrite and NdFeB magnet pull force of this specification.
How strong is the strong magnetic attraction force of 20x5mm NdFeB?
20x5mm magnet with N42 grade has a pulling force of about 6kg. The higher the grade, the higher the pulling force value.
How much can a 20x5mm ferrite magnet absorb?
The 20*5mm ferrite of Y30BH is about 1.15 lbs/0.52 kg pulling force.
The above is about how many kilograms a 20 * 5mm magnet can absorb proposed by netizens. The article was originally edited by courage strong magnetic manufacturer. I hope it will be helpful to you.
Introduction of relevant magnet pulling force;
10mm Neodymium Disc Magnet Gauss and pull force Introduction
Related pull calculation gadgets;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....