0769-23388351
Toggle Navigation
Circular neodymium magnets with a diameter of 10mm are the most commonly used magnets on the market. The main specifications are 10x1mm, 10x2mm, 10x3mm, 10x5mm, 10x10mm, etc. They are used in all walks of life. Today we will see how many such 10mm magnets are. Gaussian and magnetic pull force.
10mmx1.5mm round neodymium magnet, N38 performance, about 1800gs, magnetic pull about 860g
N52 with a diameter of 10mm and a thickness of 2mm, the surface magnetism is about 2700gs, and the tensile force is about 1.4kg
10mmx3mm thick circular ferromagnet, n45 performance table, the magnetic strength is about 3390gs, and the pulling force is about 1.9kg
D10X5MM round neodymium magnet, N38 grade, surface magnetism about 4450gs, pulling force about 2.5kg
D10*6mm disc ndfeb magnet, n38 performance, Gauss about 4800gs, pulling force about 2.9kg
10mmx10mm rare earth round magnet, N52 grade, the surface magnetic field strength is about 5200gs, and the pulling force is about 4kg.
The above is the surface magnetism and pull force of the 10mm magnet introduced by the Chinese magnet supplier courage Xiaofu, I hope it will help you.
Website related 10mm magnet products;
10mm dia x 3mm thick Neodymium Radial Disc Magnets
Diameter 10mm thickness 5mm round ferrite magnet
Calculate Magnet Gaussian by yourself
Magnetic field strength calculation of circular neodymium magnet
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....