0769-23388351
Toggle Navigation
Door sensor is one of the most common alarms, used for door, window, drawer alarm, mainly composed of two parts, a small piece is a magnet, the function is to create a small magnetic field, the other large piece is a door sensor As with the transmitter, the magnetic door switch is a "magnetron". When the magnet is close to the door magnetic switch (less than 15mm), the "magnetron" is in a disconnected state; when the magnet is removed, the "magnetron" is closed because there is no attraction of the magnet, and an alarm signal is generated at this time. The indicator light is on and transmitted to the alarm panel for alarm.
Door Magnetic Sensor Magnet Installation and Matters Needing Attention
The induction magnet is an important part of the door magnet. Whether the installation method is correct or not will directly affect the induction sensitivity of the door magnet. The induction magnet should be installed on the door or on the side that can move. When the door and window are opened, the induction The magnet is far away from the sensor to alarm.
Use the included 3M glue to stick the induction magnet on the door opposite the sensor body, as shown below.
Note: The installation of the induction magnet, "on the opposite side of the school" must be the same as the installation position of the main body of the door magnet.
After installation;
After installation, open and close the door to test the installation performance. Each time when opening and closing the door, the action indicator will light up, indicating that the installation is successful.
If the action indicator does not light up or is always on when the door is opened and closed, it means that the installation is unreasonable, and the installation position needs to be re-adjusted and the distance between the two is adjusted.
The above is the introduction of the installation and precautions of the door magnetic switch magnet. Our company mainly provides door magnetic magnet production and sales. Welcome to tell us the size and quantity of the magnet you want to evaluate the price.
Recommended products for hot selling door sensor（Alarm system） magnets;
Door Magnetic Detector Magnet 5 x 5 x 18mm
Y10T grade block ferrite 29 x 8 x 8mm
Y30bh rectangle ferrite magnet 25mm x 9mm x 7mm
Content related articles;
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....