0769-23388351
Toggle Navigation
This is a rectangular block ferrite magnet, grade is Y10T, customized for an Italian customer, the size of the magnet is 29mm in length, 8mm in width, 8mm in thickness, and magnetized in thickness, suitable for door magnetic switches, alarms, reeds Tubes, electronic products, induction devices, etc. If you are interested in this product, you can contact our sales staff to customize the magnetization method.
The length of the ferrite block magnet can be about 150mm and the width is about 100mm. The thickness of the ferrite block magnet such as this large size point should not be too thin. If thin ferrite is required, its length and width should not be large. Ferrite rectangles are also possible.
There are three magnetization methods for ferrite square magnets, please tell us which one you want.
Similar cutting ferrite products recommended;
Alarm Sensor Magnet 6x6x25mm Ferrite Block
Y30bh rectangle ferrite magnet 25mm x 9mm x 7mm
More different sizes of block ferrite blocks;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This product is a square ceramic magnet, made of sintered ferrite anisotropy, with low remanence, low recovery magnetic permeability, and strong anti-demagnetization ability. 12mm, suitable for fitness equipment, massager, magnetic control machine, air pump, if you are interested in this product, please contact....
You are now viewing this is a super small (tiny) size ferrite block magnet sample, high performance grade Y30, magnet length 2.45mm, width and thickness are 1mm, magnetization direction along the length....
This product is a variety of isotropic ferrite (Y10) rotor magnets ring, which are processed and manufactured by the Chinese permanent magnet supplier Courage Magnet. The inner aperture size of the magnet is 5.4mm, and the surface is smooth and free of defects. It can be magnetized according to the number of magnetic poles required by customers, such as radial 2, 4, 6, and 8 poles...
This product is a float switch magnet, a float ring magnet, and the material is ferrite. Drinking system, etc.), industrial equipment (such as: air oil compressor, air cooler, drain, lubricating oil system), gardening equipment, medical equipment, beauty salon equipment, aquaculture and industrial water purification, sewage treatment system, automatic door control system, Automotive and other industries....
This product is a cut ferrite square magnet, rectangular, Y30BH grade, side magnetized, mainly used for door sensor alarms, dry yellow tubes, the size is 25mm in length, 9mm in width, and 7mm in thickness. If you need this sample or want To understand the price, please send us an inquiry....
Note that this is not a NdFeB magnet. From the outside, it is indeed the same as a neodymium magnet, but in fact it is made of ferrite with a coating on the surface for magnetic therapy, such as knee pads, waist pads, neck pads, shoes, Pillow can be used, the picture below shows its magnetic force, the highest is about 800 Gauss....
This product is a ferrite magnet with a counterbore. The difference from ferrite ring magnets is the hole in the middle. The counterbore is mainly used with screws. Due to magnetism and processing problems, most of them choose neodymium iron. Boron counterbore instead, if you need to buy this counterbore ceramic magnet, welcome to communicate with us....
This product is a square ceramic ferrite magnet, magnetic grade is Y30, size is length 50mm, width 50mm, thickness 25mm, thickness direction magnetization. The place of production is Dongguan, China. It is mainly used for industry, machinery and equipment, and personal experiments, if you need it Please contact us to purchase this magnet, the minimum order quantity is 10 pcs....