0769-23388351
Toggle Navigation
N35 magnets are relatively common among neodymium magnets. There are many customers who choose N35 grades on the market. Why choose it? Today, the magnet supplier Courage Magnet will talk about the characteristics of N35 magnets.
The main reason why N35 NdFeB magnet is popular is that the magnetic force can meet the requirements and has high cost performance. The maximum magnetic energy product is about 35mgoe. The conversion between mgoe and Ka / m3 is 1mgoe = 8KA / m3, and the maximum magnetic energy product of N35 NdFeB material is 270ka / m3.
Detailed parameters of N35 magnet；
Material grade: N35
Coating: conventional galvanized, nickel-plated, other coatings can also be made according to customer requirements.
Tolerance: ±0.05
Shape: round, annular, cylindrical, tile, special-shaped, etc.
Density: ≥7.5(g/cm3)
Magnetization method: circular rings are usually magnetized in axial, radial, square magnet thickness, length or width directions.
Curie temperature: 350 degrees
Working temperature: less than or equal to 80 degrees
Magnetic properties of N35 magnets;
N35 magnet temperature characteristics and other characteristics;
N35 magnet demagnetization curve can not be less;
The above is the introduction of some characteristics of N35 magnets. If you have any questions or need to buy N35 neodymium magnets, you can contact us directly.
Content related articles;
Neodymium magnet N35 or N33 which is better?
How much is N35 per kg? Blank sintered NdFeB N35 price trend
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....