0769-23388351
Toggle Navigation
N40 magnets, a medium grade of neodymium magnets, are mostly used in motors, sensors, electronics, industry, optics, medical equipment, magnetic separation and many other industries. They are widely used. Some engineers are more concerned about whether the material is N40 or not. The content should be carefully read.
This is an important material proof. After the NdFeB blank material is sintered, the N40 grade demagnetization curve above is obtained by the demagnetization curve instrument.
The picture below is the international standard for the material grade of N40, and the test values in the picture are based on Figure 1.
We can see that the data in Figure 1 is in full compliance with the international standards in Figure 2, which proves that the material meets the performance standards of NdFeB N40 grades.
Welcome customers from all over the world to consult us to buy N40 grade neodymium magnets, specifications and shapes can be customized.
More articles related to magnet grade;
N40 grade neodymium magnet strength introduction
N38 Neodymium Magnet Surface Magnetic Field Strength Reference
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....