0769-23388351
Toggle Navigation
If you have any questions about magnets, welcome to the magnet Knowledge column of Courage Magnet (China) website. The column provides you with a lot of introduction about the installation, use and suction of magnets. Today, let's answer whether the neodymium magnet is N42 or N45 after being magnetized.
Is it N42 or N45 grade after neo magnet magnetizing?
The performance grade of the magnetized magnet depends on the material and manufacturing process of the magnet. For example, the choice is N42 grade, then after magnetization is N42, will not become N45, generally before ordering magnets, we need to confirm their own magnet performance level, if not clear can communicate with magnet manufacturers.
The above is about whether the rare earth neodymium magnet is N42 or N45 after magnetization. The article was originally edited by Xiao Fu, the courage magnet. From the introduction of the article, we can know that the grade of the magnet is not determined by magnetization, but by the raw material of neodymium magnet.
Collate articles related to N42/N45;
What is the magnetic strength of N42 neodymium magnet 8 x 8 MM ?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....