0769-23388351
Toggle Navigation
Many customers who know little about magnets may involve special shaped neodymium magnets when developing products. We call them special-shaped magnets. As it is not clear whether the magnets can be processed with special-shaped magnets, customers often ask whether neodymium magnets can be processed with special-shaped magnets. What shapes can you make?
What shapes can ndfeb strong magnets be made?
Common types of special-shaped neodymium magnets include polygon magnets, concave and convex magnets, side punch magnets, comma magnets, bullet magnets, bowl magnets, T /L magnets, Parallelogram shaped magnet, half ring magnet, which can be customized according to customer requirements.
Note: Special-shaped neodymium magnet can be processed directly without mold. Our courage magnet manufacturer has a very strong advantage in special-shaped magnet. If you have problems, please send the drawing of the magnet to our customer service email.
Content related articles editor recommended reading;
What special shapes can ceramic ferrite magnets do?
The thinnest thickness of neodymium magnets we can produce is 0.4mm
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....