0769-23388351
Toggle Navigation
Courage Magnet- one of the professional neodymium and ferrite magnet manufacturers in Dongguan, Guangdong Province, is good at processing custom-made rare earth Nd-Fe-B magnets, high-performance Nd-Fe-B special-shaped magnets, micro-precision magnets, motors, sensors with radial multipolar magnetic rings, injection-moulded ferrite magnets, ferrite magnets (magnets) and so on, providing solutions to magnet schemes, professional knowledge of magnets, is a purchase, engineering, research and development value. Must collect the motor magnet website.
Now, Xiaobian found that many customers asked for Nd-Fe-B sheets. Often they would ask, how many mm can you make the thinnest magnet? Also, mobile phones are becoming thinner and thinner now. The speaker camera of mobile phones is naturally thinner and thinner. This requires that manufacturers of magnets have certain strength and experience.
Samarium cobalt magnets before Xiaobian made samples for a precision electronics factory in Wuxi, its thickness is 0.3mm, the production of such thin magnet reject rate is very high, the price is also engaged.
Neodymium magnets is similar to samarium cobalt magnet, the thickness of about 0.4mm is easier to process, we often process.
Not only Nd-Fe-B magnets, but also ferrite magnets can be made with a thickness of less than 1 mm. The ferrite sheet shown below is 0.65, Thin Hard Ferrite Magnet Thickness 0.65mm 12.5x8.5x0.65mm
If you want to customize micro precision magnets, square block ultra-thin NdFeB magnets quotation proofing welcome to contact us.
Our thin magnet column;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....