0769-23388351
Toggle Navigation
N52 grade NdFeb magnet although the price is more expensive, but there are still many customers choose it, especially some foreign customers, consulting N52 strong magnetic is more, today Xiaobian to the NdFeb magnet N52 grade magnet material parameters and demagnetization curve description.
1、 NdFeB magnet N52 grade material performance parameters and test value data (the data fully comply with international standards)
2、 Performance Test Report of NdFeB N52
3、 Picture of N52 demagnetization temperature curve
The above is about the description of N52 grade materials and demagnetization curve of sintered NdFeB magnets. N52 magnets can be of various shapes and sizes, and the temperature resistance is less than 80 ℃. If you need to consult the price, you are welcome to provide specific specifications.
N52 Super magnet column navigation;
N52 super strong neodym magnets [Price customized manufacturer]
Introduction to N52 grade of neodymium magnet;
What is the magnetic strength of the N52 super magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....