0769-23388351
Toggle Navigation
About ferrite cutting magnet, there are many friends have a lot of problems, today magnet manufacturer courage xiaofu collected in this article, hope to help you, like friends can collect our website.
How to cut ferrite magnets?
Ferrite cutting magnet is made of block rough blank cutting, the main material is strontium (Sr) ferrite (Fe2O3) mainly, the forming time is long, but the density is high, theoretically, the block rough blank is the better, but due to the mechanical pressure limit and the consideration of yield improvement, the most bulk material specification is l220xw150x25.4mmt. Ferrite permanent magnet itself can only process its outer diameter and thickness, but it cannot be separated. If it is separated, its original performance will change and weak magnetic phenomenon will appear. Most of the processing of outer diameter and thickness is water grinding, and the appearance will change after processing, but the original shape will not change.
Cut ferrite magnet block sample image;
Ferrite cutting magnet minimum size can be processed into how much?
With the improvement of cutting ability, the minimum size of ferrite cutting magnet is l2xw2x0.8mmt, which can be cut according to the size specified by customers.
What shapes do ferrite cutting magnets have?
Ferrite cutting magnets are mainly square, round plate, cylindrical and electromagnetic coil used arch magnets, also accept sample procurement and special specifications.
What is the manufacturing process of cutting ferrite?
Coarse embryo material > Heating > Sticking > Cutting > Surface grinding > Washing > Magnetizing > Detection > Packaging > Delivery.
Cut ferrite magnet mainly used in what aspects?
Mainly used for door magnetic alarm, induction components, magnetic suction seat, door file, automatic components, DIY components, health magnetic therapy, magnetic tools, magnetic chip separator, etc.
How about the price of cutting ferrite?
The price of the magnet is related to the size, performance and quantity of the magnet you need.
This article is provided by china magnet factory courage xiaofu finishing, looking for wholesale ceramic ferrite magnets welcome to contact.
Related cutting ceramic ferrite product recommendation;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....