0769-23388351
Toggle Navigation
The ferrite cutting magnet is made by cutting the block rough embryo. The main material is strontium (Sr) ferrite (Fe203). The forming time is long, but the density is high. The bigger the better, but due to the pressure limitation of the machine itself and the consideration of the yield improvement, the maximum block material specification is 220mmx150mmx25.4mm. The ferrite permanent magnet itself can only process its outer diameter and thickness, but cannot be divided, such as The original performance of the segment will change, and a weak magnetic phenomenon will occur. The outer diameter and thickness are mostly processed by water grinding, and the appearance will change after processing, but the original shape will not change.
What is the minimum size of the ferrite cutting magnet?
With the improvement of cutting capacity, the current minimum size of the ferrite cutting magnet that can be cut is L2xW2x0.8mmT, which can be cut and manufactured according to the size specified by the customer;
The cutting of ferrite magnets is mainly block shaped, arched shaped, We are professional in making magnets, welcome to inquire about the price.
More Specifications Shape Block Ferrite
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
Have you ever seen such a small ferrite rectangle/block magnet? This is a ceramic ferrite magnet of 2mm in length, 1.5mm in width and 2mm in thickness, with black surface and Y30BH grade. It is suitable for all kinds of electronic parts, precision electronics and medical products requiring magnetism. If you are processing small, thin and flat ferrite permanent magnet suppliers, we will be a good choice for you....
This ferrite ring magnet is manufactured using high-temperature sintering technology, featuring an outer diameter of 8mm, a 3mm square center hole, and a thickness of 3mm....
To buy round ferrite magnets, welcome to contact Courage permanent magnet manufacturers in China, our company has many sizes of ceramic round, block, arc, hole ferrite magnets, factory direct sales, low price, welcome Inquiries from customers all over the world....
This is a radial 2-pole ferrite rotor magnet, the outer diameter is 9mm, the height is 10.4mm, the inner hole is oval, it has low cost, high temperature resistance, and the maximum surface magnetic field strength is about 1130 Gauss. Welcome to consult the sample and price....