0769-23388351
Toggle Navigation
This is an ultra-small ferrite block magnet, small and thin, with a thickness of only 0.8mm, a length of 3.8mm, and a width of 2mm. It is mainly used for precision electronics, Hall sensors, and is magnetized in the direction of 2. The strong magnetic surface is the length If you are interested in this kind of small ferrite magnets, you can contact us to customize without pressure!
Schematic diagram of magnetization of Hall sensor ceramic magnet 3.8x0.8x2mm;
Real pictures of ultra-small precision ceramic ferrite samples;
Other size thin flat ferrite magnets;
Thin Hard Ferrite Magnet Thickness 0.65mm 12.5x8.5x0.65mm
Thin ceramic magnet with thickness less than 1mm 40x20x0.65
Neodymium material thin magnet column;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This ferrite ring magnet is manufactured using high-temperature sintering technology, featuring an outer diameter of 8mm, a 3mm square center hole, and a thickness of 3mm....
To buy round ferrite magnets, welcome to contact Courage permanent magnet manufacturers in China, our company has many sizes of ceramic round, block, arc, hole ferrite magnets, factory direct sales, low price, welcome Inquiries from customers all over the world....
This is a radial 2-pole ferrite rotor magnet, the outer diameter is 9mm, the height is 10.4mm, the inner hole is oval, it has low cost, high temperature resistance, and the maximum surface magnetic field strength is about 1130 Gauss. Welcome to consult the sample and price....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
The sample is a regular radial magnetized ferrite circular magnet with a diameter of 5mm, a thickness of 2mm, a black surface, and an anisotropic grade. It is magnetized radially and has strong side magnetism, with a surface magnetic field intensity of about 750 Gauss....
This product is a round ferrite magnet with a diameter of 10mm and a thickness of 5mm, produced in China, without any surface treatment, axial magnetization, performance level Y30. Single/double chamfering, spray painting and baking varnish can be customized according to customer requirements. Welcome to inquire about samples and prices....
This is a rectangular block magnet used on the door magnetic alarm. The material is ceramic ferrite. The size is 25mm in length, 6mm in width and thickness. It is magnetized in the length direction, and the strong magnetic surface is 6x6mm....
This is a ferrite bar magnet approximately 6 inches in length, with dimensions of 150×50×10mm. It is made from sintered ferrite material (Y30) and features excellent high-temperature resistance and stable magnetic properties....