0769-23388351
Toggle Navigation
Neodymium magnets are also known as strong magnets, super magnets, and some people call them magnet kings, which is indeed a well-deserved name because even in small sizes, they have extraordinary strength and are currently the strongest permanent magnets in the world. material.
Iron-iron-boron（Ndfeb） excels in "magnetic properties" coefficients such as intrinsic coercivity, energy product and remanence
1. It has strong anti-demagnetization ability, the maximum intrinsic coercivity can reach about 2 times that of samarium cobalt permanent magnet, and about 3-10 times that of ferrite.
2. Instruments and meters used in iron-iron-boron magnetic materials have more potential in the field of lightweight, and the maximum magnetic energy product is 1.5 times that of samarium cobalt permanent magnets and 10 times that of ferrite;
3. The ability to resist external magnetic fields is the strongest, and the maximum remanence is 1.2 times that of samarium cobalt permanent magnets and 3-4 times that of ferrite magnets. Therefore, iron-iron-boron magnetic materials are widely used because of their comparative advantages in intrinsic coercivity, magnetic energy product and remanence, and are well-deserved "magnet kings".
In contrast, the only advantage of ferrite is that the production cost is low, so it is mostly used in relatively low-end fields. High-end fields hardly use ferrite due to high performance requirements;
Although samarium cobalt permanent magnet can work in a wide range of temperatures, its mechanical properties are poor, and it contains cobalt. The price/performance ratio is not high, Therefore, it is often only used in military, aerospace and other fields that require high temperature performance.
Our company can provide you with all kinds of super strong neodymium magnet processing customization (don't be scared by the word customization, it will not incur a high cost), some sizes are in stock, looking forward to your consultation.
Neodymium magnet related knowledge;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....