0769-23388351
Toggle Navigation
Strong flat magnets often refer to relatively thin rare earth neodymium magnets, such as strong flat rectangular magnets, strong flat circular magnets, and strong flat ring magnets, These three kinds are widely used. Such as used in handicrafts, precision electronics, medical equipment, Today, let's introduce the thickness of this powerful flat magnet.
Look at the picture of the magnet below, how thin do you think this small ring magnet is?
Answer is 0.8mm.
Can the magnet be made more flat than 0.8mm?
Of course no problem, the thickness of the strong block/round flat magnet can be mass produced about 0.5mm.
In fact, the strong and thin magnets that many customers want are not so thin, they may be 2mm or 1mm, This is no machining problem for us.
Note: Ferrite magnets can also be made very flat and thin, such as Thin ceramic magnet with thickness less than 1mm 40x20x0.65
The above is about the thickness of strong flat magnet that can be processed. Our company has great advantages for this kind of ultra-thin magnet. We can stick back glue. Welcome to consult.
Our thin magnet product column;
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....