0769-23388351

What is nail magnet, the principle and use of cat eye nail magnet

Addtime:2022-05-07 16:03:22 Click:703

What is Nail Magnet? How to use it? What is the principle? Today, the permanent magnet manufacturer Karic will share with you some things about nail art magnets, including the shape, function, usage and precautions of the magnet.


What is Nail Magnet?

Nail magnet is a kind of magnet used for women's manicure. The material is strong magnetic NdFeB, and the shapes are mainly round, block rectangular and cylindrical. The magnets attract cat eye gel to make the nails beautiful.


Nail magnet principle;

The magnet powder in the cat's eye gel will be absorbed and gathered under the action of the magnet, and under the reflection of light, a light band like the pupil of a cat's eye will appear.


How to use cat eye nail magnets?

685.png

The use method is also very simple. After cleaning and polishing the nails, apply a removable primer, and apply the first layer of cat eye glue to light it up. When applying the second time, do not illuminate the lamp. The lamp will not attract magnetism. Keep it stable for 3-5 seconds. Be careful not to touch the nail surface with the magnet. After the magnet is absorbed, go to the light for a short time, otherwise the magnetic powder will slowly disperse.


If you are not satisfied, you can apply another layer of cat eye gel, and then attract the magnet again until you are satisfied.


The above is the introduction of the function, principle and usage of nail art magnets. Our company is a magnet manufacturer, and can produce and customize various specifications and shapes of rare earth neodymium magnets and ferrite magnets according to customer requirements. We welcome consultation.

Tags:
MAGNET PRODUCT RECOMMENDATION

4000 Gauss Strong Neodymium Disc Magnet 5mm x 4mm

Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...

6.5mm diameter and 0.6mm thick strong disc ndfeb magnet 6.5x0.6mm

Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....

Through hole cylinder magnet with inner hole diameter 0.9mm

The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....

5mm Square Ndfeb Magnet for Headphones 5x5x2mm

This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...

Low cost radial 6 poles ferrite rotor magnet rings for motor rotor

The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....

Small bar ndfeb magnets N42 1.5mm x 1.5mm x 10mm

This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....

30x20x10mm neo block magnet magnetization in length direction

This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....

N52 Gold Plated Small Magnet Ring 5mm x 2mm x 2mm

​This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

CONTACT NOW