0769-23388351
Toggle Navigation
Ferrite permanent magnets are divided into two types: isotropic and anisotropic. The manufacturing methods include dry press molding and wet press molding. Because the raw materials are cheap and mass production is easy, it is the most demanded and most versatile material on the market.
The so-called isotropic magnet is formed by fine metal particles in powder metallurgy, but without any magnetic field arrangement, it is directly formed by pressure. It can be used in a variety of magnetization methods according to customer requirements, which is less restrictive. But the disadvantage is that the magnetic flux density is weak, and some applications may not meet the magnetic force requirements set by customers.
The so-called anisotropic magnet is just the opposite of the isotropy. It uses a fine powder during molding, and uses the arrangement of high-pressure magnetic fields to make the magnetic field become a fixed axial or radial direction. The method of arranging the magnetic field during the molding process is magnetized, which cannot change the direction of magnetization that has been shaped. The advantage is that the magnetic force is strong and the coercive force is also high.
The main difference between the isotropy and anisotropy of ferrite magnet
The picture product is Y10 Isotropic ferrite rotor magnet 5.4mm inner hole
Isotropicity: 1. The raw material is granular and the size is about 3 ~ 4 μm. 2. When forming, the raw materials are not arranged by magnetization. 3. It can be magnetized in any direction. 4. Magnetize according to the thickness direction, the magnetic force is about 500 ~ 800 Gauss.
Anisotropy: 1. The raw material is in powder form with a size of about 0.85 ± 0.1 μm. 2. When molding, the powder is arranged by magnetization. 3. When magnetizing, a certain direction is required, such as axial or radial...etc. 4. Magnetized according to the thickness direction, the magnetic force is about 800 ~ 1,400 Gauss.
Ferrite and other square molded magnets: mostly single-sided magnetic force, widely used as a magnet for refrigerator suction, as one of the gift components.
Ferrite anisotropy molded magnet: two-sided magnetic force, slightly stronger, widely used, such as electronics, toys, industry, furniture, stationery, gifts, etc. can be applied, application products such as micro motors, generators, Inverter motor, iron chip separator, buzzer, magnetic tool, fastener element, sensor element, DY image adjustment, health magnetic therapy, speaker, door stop, submersible pump, automatic component, movement, magnetic suction seat, Others.
PS: The advantages of ferrite are easy magnetization, electroplating or baking paint, low cost, moderate delivery time, medium magnetic strength, single-sided or multi-polar magnetic can be produced according to customer needs, easy material acquisition, and mass production.
How about it? Is the knowledge up again? The copyright of this article belongs to Courage Magnets. Please contact the author for any reprint.
Related ferrite magnet column direct;
This is an ultra-small ferrite block magnet, small and thin, with a thickness of only 0.8mm, a length of 3.8mm, and a width of 2mm. It is mainly used for precision electronics, Hall sensors, and is magnetized in the direction of 2. The strong magnetic surface is the length If you are interested in this kind of small ferrite magnets, you can contact us to customize without pressure!...
This is the courage magnet manufacturer to provide you with a anisotropy multi-pole ferrite ring magnet, through the side (radial) 12 pole magnetization, the surface magnetic is about 1050 gauss, its size is 28.4mm outer diameter, 17.5mm inner hole, thickness of 4mm...
This product is a ring-shaped ferrite magnet with an outer diameter of 20mm, an inner diameter of 10mm, and a thickness of 3mm. There is no coating on the outside. The magnetizing method is axial/planar 4 poles and the surface magnetic field strength is about 980gs. If you are interested in this magnet, please contact We provide you with samples, and other specifications are needed. We can also provide you with more magnetic poles....
Sample shot is a small and thin radial neodymium magnet ring, belongs to rare earth magnets, zinc-plated surface, outer diameter 6.5mm, inner hole diameter 3.5mm, thickness 0.5mm, through the diameter of the direction of the magnetization...
You are now seeing this is a non-standard customized sintered ceramic ferrite magnets, thickness 9mm, 14 pieces of a group, made of high grade Y33 grade or more, with strong magnetic strength, widely used in a variety of micro-motors, power tool motors, sports equipment motors...
The magnet is a multipolar Ndfeb magnetic ring, the material is bonded neodymium magnets, there are 12 magnetic poles, using the radial inner diameter magnetization, the use of surface for the inner side, the outer diameter of the ring magnet is 28mm, the inner diameter of 24mm, the height of 10mm, the surface black electrophoresis, the measured surface magnetic field intensity of about 2680 Gauss...
This product is provided by China's neodymium magnet manufacturer, The shape is a circle disk, sintered neodymium material, the magnet diameter of 30mm, thickness of 10mm, axial (thickness) magnetization, nickel plated surface, weight of 8.96g, surface magnetic field strength is greater than 4500 Gaos, tension about 2.8kg,...
This is a medium-sized ring neodymium magnet. The specific material is bonded neodymium iron boron. It is a magnet that needs to be pressed by mold. The size of the magnetic ring is 45.9mm in outer diameter, 41.4mm in inner diameter, and 13mm in height. radial inner diameter magnetization 10 poles, The surface is black epoxy coating. It is mainly used for various permanent magnet DC motors. Brushless motors。...