0769-23388351
Toggle Navigation
What is the black thing on the outside of the bonded neodymium magnet? What kind of coating is it? In addition, which protective layers can be plated? What is the maximum working temperature for bonded neodymium magnets? Today we will discuss these question.
What is the black coating on the surface of the bonded neodymium magnet?
It is black epoxy. In addition, it can also carry out coating and surface treatment processes such as acrylic resin electrophoresis, epoxy resin spraying, Teflon spraying, parylene deposition, vacuum dipping, etc. Corrosion, solvent resistance, friction resistance and other requirements, the specific coating requirements can be selected and superimposed according to the requirements of the use environment.
Bonded Neodymium Magnet Maximum Working Temperature
The maximum working temperature of the bonded iron iron boron magnet is around 120-150 ℃, depending on the grade.
Curie temperature of bonded neodymium magnet
Curie temperature of bonded NdFeB magnets: 310-340℃
What shapes can your company's bonded neodymium magnets process?
Bonded neodymium magnets are mainly ring-shaped, multi-pole magnetized, and can also be made into square, ring, arc, etc.
Bonded iron-iron-boron magnets are one of our advantageous products. We can provide complete pressed bonded iron-iron masonry magnets according to customer requirements. If you have the intention to open a mold, you can contact us for quotation and mold opening to ensure The rights of customers, product molds are designated by customers for exclusive use.
Related bonded neodymium magnet columns;
Plastic bonded neodymium magnets
Related bonded magnet articles;
Magnetization Direction of Bonded Neodymium Magnets
Causes and influences of unsaturated magnetization bonded NdFeB magnets
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....