0769-23388351
Toggle Navigation
Today, I saw a friend search for the magnetization methods of bonded NdFeB? There must be friends who want to know more about it, so I will share it with you below.
The magnetization methods of bonded NdFeB magnets mainly include: axial magnetization, radial magnetization, outer diameter magnetization, inner diameter magnetization, oblique angle magnetization, plane magnetization, radiation magnetization, etc. Very Lord.
Regarding axial magnetization, radial magnetization has been mentioned many times before. I won’t talk about it here. The magnetization of the radiation magnetic ring means that the inner circle is all S, and the outer circle is N. The following mainly talks about the lower viscosity. The outer diameter surface of the junction NdFeB is magnetized, the inner diameter surface is magnetized, the oblique angle is magnetized, and the plane is magnetized.
Multi-pole magnetization of outer diameter surface (picture)
Multi-pole magnetization of inner diameter surface (picture)
Bonded magnetic ring oblique charging, oblique angle magnetization
The above is about the magnetization method of bonded NdFeB. If you have any questions, please contact courage magent.
Products related to this article;
More magnet magnetization directions;
Schematic Diagram of Permanent Magnet Magnetization Direction
Schematic of the magnetization direction of several special shaped magnets
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....