0769-23388351

Hall-Effect Magnet for Water Flow Measurement Sensor

Addtime:2026-10-27 15:33:17 Click:7

The water flow Hall induction sensor magnet is a device used to measure water flow, which utilizes the Hall induction effect to achieve measurement. This device usually consists of a Hall sensor and one or more permanent magnets.


When water flows through the device, the permanent magnet in the device will generate a magnetic field, and the Hall sensor can sense the change in this magnetic field. According to the principle of Hall induction effect, when the magnetic field changes, the Hall sensor will generate a voltage signal. By measuring the magnitude of this voltage signal, the velocity and flow rate of the water flow can be inferred.


Water flow Hall induction magnet material;

Mainly ferrite, such as injection molded ferrite, sintered ferrite, multipole magnetization, surface magnetic strength is generally around 800-1400 Gauss, which can be customized according to customer requirements.


Hall-Effect Magnet

Hall-Effect Magnet


Function of the magnet in a water flow sensor:

The magnet generates a magnetic field, which is affected when water flows through it. This change is detected by a Hall sensor, generating an electrical signal.


Features of Hall-effect magnetic sensors for water flow measurement:


Non-contact measurement: Utilizing the non-contact Hall effect principle, these sensors do not require physical contact with the flowing water, eliminating resistance and wear caused by direct contact.


Fast response: Due to their high sensitivity to changes in magnetic fields, Hall-effect sensors can quickly respond to variations in water flow.


Long service life: Typically made from corrosion-resistant materials, these sensors offer stable and reliable operation over extended periods.


Suitable for various liquids: They can be used not only with regular tap water but also in environments involving corrosive or special fluids.


The above provides an overview of Hall-effect magnetic sensors for water flow measurement. For purchase inquiries or sample requests, please contact customer service via the website.


Introduction to relevant Hall magnets;

Which side of the Hall sensor sensing magnets?

Which material is good for Hall sensor magnets?

MAGNET PRODUCT RECOMMENDATION

1x1mm N52 Neodymium Disk Magnets For Model 2900 Gauss

This 1mmx1mm miniature circular magnet has a compact size and a surface magnetic field of approximately 2900 Gauss, making it suitable for precision applications with high requirements for magnet size....

N35 Tiny thin flat round ndfeb magnets OD 1.5mm x 1mm

This product is a miniature round magnet, made of rare earth NdFeB magnets, belonging to the ultra-small size magnet series, using N35 grade, the specific size is 1.5mm diameter, 1mm thickness, axial magnetization, surface nickel coating, tolerance ±0.05, such as If you are interested in this small magnet product, you can contact us to customize it for you....

Sintered Ferrite Cylindrical Rod Magnet C5 Grade 5mm x 28mm

Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...

Y35 miniature magnetic block 3x1.3x4mm 1300 Gauss

The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....

Tiny Ferrite Magnet Block Length magnetization 1x1x2.45mm

This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....

Small Ceramic Ferrite Block Magnet 7.4mm x 6mm x 5mm

7.4x6x5mm Ferrite Small Block Magnet Introduction,Material: Hard Ferrite (Ceramic),Shape: Block / Rectangle / Bar,Coating: No Coating,Grade (Chinese Stardard): Y30,Operating temperature: -40°C to 250°C,Delivery time: 7-15 days,Magnetization direction: thickness....

U shaped ndfeb magnets in the shape of the letter U

U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....

4 pole bonded ndfeb ring rotor magnet 16 x 5 x 20 mm

This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

CONTACT NOW