0769-23388351
Toggle Navigation
Brushless DC motor magnet is a key component of motor performance, mainly made of NdFeB material, with high magnetic energy product and durability. With the continuous progress of technology, the performance and price of magnets are also changing, the following is the price of brushless DC motor magnets related to the introduction.
How much is a magnet inside a brushless DC motor?
The price of a single one ranges from a few cents to several tens of yuan (RMB). The price of motor magnet is also based on the magnet material price, magnet material, performance, specification shape, tolerance, processing difficulty, surface treatment and other factors, so if you need an accurate quote, you also have to provide specific information parameters.
In general, in brushless DC motors, ndfeb arc curved magnets and special shaped magnets are usually more expensive due to their processing difficulty and material utilization, while rectangular ndfeb magnets and hollow cylindrical magnet are relatively economical.
BLDC Motor Arc Ndfeb Magnets
How much does the scrap magnet inside a brushless DC motor cost?
From the recent market, the recycling price of motor scrap strong magnet is in the range of RMB 113-118 yuan/kg.
As the price of rare earth materials fluctuates and environmental requirements increase, magnet production processes and material choices continue to evolve. In the future, new alternative materials may emerge, further affecting the market price of brushless DC motor magnets.
Above is about brushless motor magnet price related, usually, bulk purchase can enjoy lower unit price, need quotation and delivery time please provide drawing or size data, quantity and so on.
Many people also clicked on the following articles:
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....