0769-23388351
Toggle Navigation
Another Canadian customer chose to buy N52 neodymium magnets from us. This month, several customers from Canada have consulted with us on magnets and successfully reached cooperation. If you also need to buy this high-grade strong magnet, we will be your good choice. Magnet supplier, buy magnets from us at a lower price.
N52 magnet is the highest grade of neodymium magnet, the maximum working temperature is 80℃, the magnetic performance parameters (BH) m≥50－53MGOe, Hcj≥12.0KOe, Br≥14.3－14.8KGs; the maximum magnetic energy product is about 65% higher than that of N35 magnet , N52 grade, like other grades, can be directly machined into various shapes without molds, such as arc, special-shaped, annular, square, cylindrical, countersunk, etc, The thickness can be as thin as 0.4mm.
N52 convex magnet sample；
If you need to buy N52 neodymium magnets, please tell us the shape, working temperature, dimensional tolerance, coating, etc. you need, we can process and produce according to your requirements, and the price may be lower than what you buy now.
Other Shapes N52 Neodymium Magnets；
N52 Grade Magnetic Connector Magnet
N52 grade convex block rare earth magnet
N52 epoxy sink hole ndfeb magnet
N52 related magnet articles;
What Is the Difference Between N50 And N52 Magnets?
How much stronger is N55 grade neodymium magnet than N52?
What is the strongest magnet, n52 is it the strongest magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....