0769-23388351
Toggle Navigation
For online shopping magnets, welcome to contact the Chinese NdFeB and ferrite magnet manufacturers (established for 12 years). Our company supplies permanent magnets with various specifications and performances. Quality is guaranteed. All support non-standard customization, factory direct sales, compared to the current Some magnet shopping malls have more price advantages, and we look forward to your consultation.
The magnets used in hard disk drives are very strong neodymium (rare earth) magnets. Typically a magnet will have a north pole on one face, and a south pole on the other face. Hard drive magnets differ in that they act like two magnets stuck together side by side. On one face there is a north pole on the left and a south pole on the right, on the other face there is a south pole on the left and a north pole on the right....
The product is heat-resistant circular disc magnetic steel, the specification and size is 8mm in diameter, 3mm in thickness, standard tolerance, no plating on the surface (it is OK to plating if you want), and it size can be customized, Welcome to inquire about the size you want....
Note: Whether ferrite or neodymium strong magnet, our company can carry out shape, performance, tolerance, coating and other personalized customization, because we are a magnet manufacturer....
This is an arc-shaped ceramic ferrite magnet, Y35 grade, radial magnetization, mainly used in some automotive motors, the operating temperature is between -40C and 250C, customers who have purchased high-performance arc-shaped ferrite magnets are welcome Contact our company (focusing on motor magnets), there are many molds and high cost performance....
Did you see that? Our magnet products are not marked with price? Why is that? The main reason is that we are a magnet manufacturer, not a trader. The performance level, coating and tolerance of the magnet can be customized, which has great selectivity....
Upload it today is just for an American customer production 0.5 mm thick square wafer ndfeb magnet, strong magnetic, size length width to 10 mm, thickness 0.5 mm, is nickel plating, N52 grades, if you have similar ultra-thin ndfeb magnets, Ultra-thin ferrite magnet, ultra-thin samarium cobalt magnet need quotation, sample, welcome to contact customer service....
This is a small samarium cobalt magnet, made of rare earth samarium cobalt magnetic material, the size is 2mm in diameter and 2mm in thickness, the material is Sm2Co17, the grade is 26, and it is axially magnetized, so the N pole and S pole are on the plane, The surface is uncoated and is mainly used in high temperature industrial environments....
This is a round neodymium magnet with a diameter of 2mm and a height of 2mm. It belongs to the category of mini magnets. The magnetic grade can be selected from N35-N52. It is also possible to withstand high temperature of more than 100 degrees. The surface is nickel-plated and copper-nickel can protect the magnet higher Extend the service life, suitable for DIY decorations, fixing photos, changing Lego, electronic products, etc., and accepting customization....
This product is a rare earth neodymium arc segmented magnet, mainly used for motors, the size is not fixed, it is a customized product, welcome customers from the United States, Italy, India, Malaysia, Russia, Spain, Canada, South Korea, the Netherlands and other places to come to the drawing consultation ....
This is a hollow tube magnet made of sintered neodymium iron boron, which is the strongest material at present. It can be magnetized axially or radially, and the surface is coated with epoxy resin. It has good salt spray resistance and corrosion resistance, and is suitable for use in water or other harsh environments....
This is a square rare earth neodymium magnet with a through hole (straight hole), N35 grade, the size of the magnet is 20mm long, 20mm wide, and 5mm thick, the magnetization method is thickness magnetization, and the surface has three layers of nickel, copper and nickel for good protection. Magnets, make life longer, suitable for industry....
This is a small and strong square neodymium magnet (cube magnet) with a length of 10mm, a width of 10mm and a thickness of 10mm, N35 grade, the surface coating is nickel-copper-nickel, you don't think they are small, but they have a strong pulling force, You need to be careful when using or playing, it is mostly used in magnetic toys, electronics, industry, and similar sizes are 3x3x3mm, 4x4x4mm....
This is a semi-circular magnet made of the rare earth NdFeB N52. We can think of it as half of a circle. Some customers may not require a standard semicircle, while others may require more or less volume semicircles. Others may need to punch holes in a semi-circular magnet, like this product....
Epoxy resin coating is a kind of superior to zinc nickel plating protective layer of neodymium magnets, to better protective ability, mainly in black color, gray is given priority to, also can be other colors, excellent resistance to damp and hot, adhesive performance, It is very resistant to salt, air, water or moisture....
In addition to purchasing neodymium bar perforated magnets at Home Depot and Lowes, you can also choose to purchase from our Courage Magnet Factory (China), and the price will be cheaper. All magnet sizes, performance, magnetization direction, etc. can be customized according to your needs. Please consult us!...
This is a relatively flat square counterbore magnet, which is made of rare earth neodymium magnet. It is the strongest magnetic material at present. The size of the sample displayed is 20mm in length, 20mm in width, 3mm in thickness, and the surface is nickel plated. Magnets with counterbore like this are generally axial in magnetization direction...
