0769-23388351
Toggle Navigation
Height 31.3mm arc sectioned neodymium magnet introduction;
Manufacturer: Courage Magnet
Type of magnet: neodymium arc curved magnets
Magnet size: Curved magnet outer diameter 7.4, inner diameter 5, height 31.6, 90° See the drawing below
Surface coating: nickel copper nickel
Performance level: N38 (Support customized performance improvement)
Direction of magnetization: radial
Operating temperature: Maximum 80℃
Packaging: Scotch tape + white paper box + foam
Price: According to the actual size, performance grade, purchase quantity
Ndfeb arc segment magnet radial D7.4 x d5 x 31.6 schematic diagram；
Recommended reading by editors;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
60mm x 20mm large neodymium counterbore magnet parameters，Our company is a magnet supplier from China. We can customize all kinds of large size magnets and very small neodymium magnets. Welcome to consult and quote....
The sample is 60mm diameter round magnet with hole, thickness 5mm, center hole 6mm, also can be called ring magnet, material is strong NdFeB, N38 grade, surface zinc plating, axial magnetization, that is, the thickness of the magnetization, the strong magnetic surface in the 2 flat surfaces....
Hollow cylindrical neodymium magnet is mainly used in hollow cup motor or industry. Sintered neodymium iron boron permanent magnet is generally used in hollow cup motor. The common neodymium iron boron magnetic steel suitable for hollow cup motor is circular, with properties such as N40, N45, etc. and temperature resistance of about 100 ℃....
Our common epoxy coated magnet is black epoxy, but in fact the epoxy can be many colors, such as red, green, white, you are now seeing this is a red round neodymium magnet, is the use of red epoxy coating, the material is neodymium-iron-boron, the diameter of 5mm, the thickness of 2mm...
This product is a block neodymium magnet with a length of 25 mm, a width of 10 mm and a thickness of 2 mm. It has a small tolerance and belongs to the 1-inch block permanent magnet series. It has a double-sided magnetic force, and its magnetic strength is around 1900 gauss....
This is a 5mm thick ring magnet made of sintered rare earth neodymium, the outer diameter of the ring is 62mm, the inner hole is also relatively large, 54mm, belongs to the medium size neodymium ring magnet, there is no need to customize in stock, axial magnetization, nickel plated surface, silver white,...
This product is a through hole ring magnet with diameter 10mm, thickness 5mm, hole 5mm, galvanized on the surface, magnetized in thickness direction, N35-N52 grade can be selected, the highest temperature is 80-220 degrees, and it is packed as foam + carton + magnetic separator plate + outer box. If you want to know the price, please send us an email....
This is a customized 2.5 inches powerful ring magnet, material is rare earth neodymium, the outer diameter of the ring 65mm, hole 46mm, thickness 8mm, the surface of the conventional nickel-plated treatment,...