0769-23388351
Toggle Navigation
This product is a bonded NdFeB magnet used in brushless motors. It is an injection-molded magnet made by pressing. Therefore, it has excellent magnetic performance, which is only slightly inferior to sintered samarium cobalt. Bonded NdFeB uses isotropic magnetic powder, which can be magnetized without prior magnetic field alignment, and the direction of magnetization can be unlimited. However, due to process factors, the magnet products still need to be processed by surface coating. In addition, although the temperature resistance and machining properties of the bonded NdFeB magnets are not as good as those of the iron oxide injection magnets, the cost of the bonded NdFeB magnets is lower than that of the iron oxide injection molded magnets in the mold opening and magnetization fixture parts.
The company can provide epoxy resin electrophoresis, acrylic resin electrophoresis, epoxy resin spraying, Teflon spraying, parylene deposition, vacuum dipping and other coating and surface treatment processes, so that the products can meet the long-term work in daily and different use environments. Corrosion resistance, solvent resistance, friction resistance and other requirements. The specific coating requirements can be selected and superimposed according to the requirements of the use environment.
Welcome to contact Courage for ready-made or near-specification samples, and you can customize the specifications and dimensions you want.
Many users also clicked on the following columns;
Plastic bonded neodymium magnets
Many users also browse the following article;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This product is a radially magnetized 10-pole (5N5S) ring magnet, the material is bonded NdFeB, the surface coating is black epoxy, the magnet size is 27mm outer diameter, 22.7mm inner diameter, 21mm height, if you feel this specification If you are interested, you can contact our company for a quotation, provide samples...
This product is a 12 poles axial ferrite ring designed for rowing machines. It features a relatively large central bore and is manufactured from high-performance sintered ferrite material....
If you are looking for a 6-pole (3-pole pair) multi-pole ferrite ring sample, take a look at this one. Made of sintered ferrite, it has an outer diameter of 26.5 mm, an inner bore of 12.5 mm, and a thickness of 3 mm....
This product is a radial 8-pole rotor magnet. The material is injection-molded ferrite. The surface has no special treatment. At present, our company can provide injection-molded magnetic products with various properties, including injection-molded ferrite, injection-molded NdFeB and injection-molded ferrite....
Buy motor radial magnetized ring magnets, courage magnet mold, provided today is a radial 8 pole ceramic ferrite magnetic ring, the inner circle (inner diameter) for the use of strong magnetic surface, sintered ferrite material, magnetic ring specification outer diameter 40.3mm, inner diameter about 28mm, height 16mm, surface magnetic strength 1205 Gauss,...
This product is a magnetic encoder disk designed specifically for encoders. It features a ring-shaped design made of rubber-ferrite material with a dual-ring magnetization structure, available in 64-pole and 62-pole configurations. The specifications are: outer diameter 29 mm, inner diameter 15 mm, and thickness 1.1 mm....
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a 20mm outer diameter, 6mm thick same-pole ferrite ring magnet manufactured from Y10 grade material. It offers stable magnetic properties and excellent temperature resistance, making it suitable for various sensing and motor applications....