0769-23388351
Toggle Navigation
There are so many people who pay attention to magnet Gauss. Today, some netizens asked Xiaofu if a 15 x 5mm magnetic meter can achieve 5000 Gauss. Here is my answer.
The magnitude of the magnetic force of a magnet is usually measured in Gauss (GS), and the size and shape of the magnet can affect the strength of the magnetic field it generates. For a circular neodymium iron boron magnet with a diameter of 15mm and a thickness of 5mm, it is unlikely to reach 5000 Gauss, let alone other materials.
High strength neodymium magnet disc 15mm x 5mm（9/16"x 3/16"）
Taking ordinary performance N35 with thickness magnetization as an example, the surface magnetic field size is about 3010 Gauss, so even with N52 performance, it is estimated to be around 3800 Gauss.
If a 15mm diameter neodymium iron boron magnet needs to reach 5000 Gauss, higher thickness dimensions are required, such as 15 x 10mm (10mm thickness), 15x15mm, etc.The above is an introduction about whether the 15 * 5mm magnet can achieve 5000GS. If you need a quotation or customized neodymium iron boron strong magnets, you can communicate with our online customer service for assistance.
Content related articles;
How much weight of somethings will can be pull for 5000 gauss magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....