0769-23388351
Toggle Navigation
As the strongest known permanent magnet material with the strongest magnetic properties, NdFeB magnet is widely used in industrial and consumer fields. Some netizens asked about its temperature resistance range is how much, the following small payment on this issue to make an introduction, so that you can better understand and apply.
In general, the operating temperature range of standard NdFeB magnets is from -40℃ to 80℃.
Pictured are square countersunk neodymium magnets.
In order to meet the demands of higher temperature environments, manufacturers have developed different grades of high temperature type NdFeB, such as H grade, SH grade, UH grade, EH grade and AH grade. These different grades of NdFeB magnets can reach a maximum operating temperature of 120°C, 150°C, 180°C, 200°C or even 220°C or more, respectively.
The magnetic properties of NdFeB are relatively stable at low temperatures, and the remanent magnetization of some magnets even improves slightly below -50°C. However, extreme low temperatures may lead to an increase in the brittleness of the material, which needs to be evaluated in conjunction with the application scenarios for the mechanical properties.
Therefore, the temperature adaptation range of NdFeB magnets can be covered from -50℃ to about 230℃ according to different types. Reasonable selection and correct use is the key to ensure its stable performance and prolonged service life.
More about neodymium magnet temperature resistance introduction;
What temperature do magnets stop working？
Do neodymium magnets demagnetise at transient high temperatures?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....