0769-23388351
Toggle Navigation
Many friends pay attention to the sintered NdFeb strong magnet N50 brand how much magnetic force? How high is the magnetic strength of the meter? The following is a small series of magnet specifications for example, N50 strong magnet surface magnetic is usually more than 4000 gauss, the specific or depends on the size of the magnet specification.
Below are some surface magnetic data for the round/block N50 neodymium magnet;
N50/NI/axial magnetization/D14*5: surface magnetic 4100GS.
N50/D6.5*5: Magnetic field intensity 4760GS.
N50/D8*5: Magnetic field strength 4900GS.
N50/D32.6*20: Surface magnetic 4550 Gauss.
N50H/D2.7*1.5 Surface magnetic strength 3515GS.
N50/D25.5*1.5: Surface magnetic 1022 Gauss.
N50/D3.5*2mm: central magnetic field intensity 4010gs.
N50 Grade Block Magnet F60*20*5 about 3960 Gauss.
N50/D15 x 5mm/±0.1/NI/ Magnetic 4500-4600GS
N50/NI/ Convex Step magnet D6*1.5+D10*1.5mm, about 4000 Gauss.
About the sintered NdFeb magnet N50 surface how many Gauss? This also depends on the magnet specifications, the above is about the NdFeb part of the N50 table magnetic, for reference only, there is a need to purchase customized N50 strong magnet round
ock/arc, n50 special shaped magnet, welcome to consult contact.
Related neodymium magnet strength/Gauss article introduction;
What is the magnetic strength gauss of the N52 super magnet?
How to judge whether the neodymium magnet has 4000gs(gauss)
How many gauss do ndfeb (neodymium) magnet have?
Calculation of surface magnetic field strength of neodymium block magnet
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....