0769-23388351
Toggle Navigation
18mm neodymium magnets are a relatively standard size, and customers can choose the appropriate shape according to their product needs, such as 18mm round, 18mm ring, or 18mm block. To help you understand its Gauss and pull strength, we have compiled some data for your reference.
The magnetic flux density of 18 mm neodymium magnets is mainly affected by their grade (such as N35, N42, N54) and volume. As the grade of the magnet increases, so does the magnetic flux density.
For example: 18x2.5mm round neodymium magnet, with a surface magnetic field strength ranging from approximately 2000 to 2700 Gauss and a pull force of about 2 kg. For example. 18mm x 5mm round neodymium magnet, with a surface magnetic strength of over 4000 Gauss and a pulling force of approximately 3 kg.
18mm neodymium magnet size reference comparison coin
Let's take a look at the 18mm block neodymium magnet, 18x3x3mm, with a surface magnetic flux density of approximately 3400 Gauss and a pulling force of approximately 1.3kg. 18x3x4mm, with a surface magnetic flux density of approximately 3500 Gauss and a pulling force of approximately 1.6kg.
Finally, there is an 18mm ring shaped neodymium magnet with an outer diameter of 18mm, hole 7mm, thickness 6mm, a surface magnetic flux density of approximately 3600 Gauss, and a pulling force of approximately 3.5 kg.
It should be noted that the magnetic flux density of 18 mm neodymium magnets is mainly affected by their grade (such as N35, N38, N42, N54), volume, and magnetization direction. With the same dimensions, as the magnet grade increases, the magnetic flux density also increases, as does the pulling force.
"How much can be sucked" is not the same as “pull force.” Pull force is the force required for separation, and theoretically, it can hold objects lighter than this weight. However, in practical applications, due to factors such as vibration, impact, and uneven contact, the safe load should be much less than this maximum value.
Introduction to articles on magnetic flux density;
How much weight of somethings will can be pull for 5000 gauss magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....