0769-23388351
Toggle Navigation
Some netizens are curious about how much praseodymium neodymium metal a ton of praseodymium neodymium oxide produces. Today, Courage Xiaofu, a manufacturer of DC motor magnet, will give you a brief introduction.
Industrial production of 1 ton of praseodymium neodymium metal requires the consumption of raw material neodymium praseodymium oxide, electric energy, electrode loss, electrolyte solution, labor and other costs. 1 ton of neodymium praseodymium oxide cannot produce 1 ton of neodymium praseodymium alloy (ie, Praseodymium neodymium alloy), which is about 1.2 -1.3 tons.
The above is about how many praseodymium neodymium alloys are produced by a ton of praseodymium neodymium oxide. The data comes from the network.
Expand knowledge of praseodymium and neodymium oxide;
Praseodymium neodymium oxide gray powder is the raw material of metal praseodymium neodymium (i.e. praseodymium neodymium alloy). Praseodymium neodymium oxide forms metal praseodymium neodymium after melting and processing at high temperature. Metal praseodymium neodymium is the main raw material for the production of high-performance NdFeB permanent magnet materials, which accounts for about 27% of the cost of NdFeB permanent magnet materials.
Related magnet products;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....