0769-23388351
Toggle Navigation
Hello everyone, I am Courage magnet manufacturer Xiaofu, a network promoter who has been in the magnet industry for 6 years. If you have magnet problem. Please contact me. Today's topic: Is wet pressed ferrite magnets the anisotropy?
When it comes to wet-pressed ferrite, it is necessary to mention dry-pressed ferrite. These two are ferrite production processes. It is also better to understand that wet-pressure is the molding slurry containing moisture, and the magnetically shaped particles are easily turned. Therefore, it has a higher degree of orientation than the dry pressure difference performance, and its performance is higher.
Sintered anisotropic ferrite radial rotors are used in motors
Going back to the question we just said, Is wet pressed ferrite the anisotropy?
Yes. The dry pressure is mainly used for the same-sex and low-grade heterogeneous magnetic steel, such as: Y25 performance below. High performance can only be produced by wet pressure.
Introduction of the process flow of wet pressed ferrite;
The wet pressing process is: raw material → pre-burning → coarse pulverization (one ball milling) → batching → secondary ball milling (wet grinding) → magnetic field forming → sintering → grinding → cleaning → magnetization.
The above is an introduction about whether the ferrite wet pressure is anisotropy. I hope my answer can help you.
Need to buy ferrite magnet recommended click to view;
Injection Molded Ferrite Magnets
Wet pressed ferrite magnet more introduction article;
What does wet pressed ferrite mean? Main uses of wet pressed arc ferrite
Difference between isotropic ferrites and anisotropic ferrite magnets
This is a multi-pole ferrite magnetic assembly, composed of injection molded ferrite + shaft, also known as injection molded ferrite magnetic rotor magnet, rotor OD 29.8mm, height 7.5mm, shaft 3.17mm...
Product Name: 6x6mm cylindrical neodymium magnet, Color: silver white, Manufacturer: courage magnet, N35 is about 4100 Gauss, and n52 is about 4800 Gauss, We have a great price advantage in the production of high-performance magnets. We look forward to your consultation!...
This product is a small magnet, made of neodymium with galvanized surface. How small are these magnets? 5mm, 8mm in length, 2mm in width, 2.5mm in width, 1mm in thickness, 1.5mm in thickness, if you are interested in such small neodymium block magnets, you can tell us the size you actually need, and...
You are now viewing a ceramic ferrite ring magnet with 60mm bore (center hole), 120mm outer diameter, 20mm thickness, medium to large size magnet, no plating on surface, especially suitable for speakers, horns, salvage, fishing, and mechanical equipment,...
Introduction of small size ring neodymium magnet; Product name: Nickel-plated strong neodymium small ring magnet，Performance level: N35 (can be customized for higher performance)，Product size: 8mm diameter, 2mm thickness, 4mm middle hole...
This is a thin rectangular block neodymium magnet, the specific specifications are length 40mm, width 25mm, thickness 1.5mm, strong magnetic force, N35 grade, magnetized in the thickness direction, suitable for ceiling lamps, crafts, home furnishing, electronic products, can be matched with 3M back glue to use....
This is a small size ring rare earth magnet, N38M grade, the outer diameter of the ring is 11mm, the hole is 2mm, which is also relatively small, the thickness is 5mm, the surface is plated with bright nickel, this type of magnet is suitable for passing through some thin shafts....
This is a very hot neodymium round magnet size, diameter 10mm, thickness 2mm, in many areas can be applied, the only difference is that different customers choose the coating, performance level and temperature resistance performance on the difference, the magnet weighs about 1.2g....