0769-23388351
Toggle Navigation
What is Isotropic ferrite? What is anisotropic ferrite magnets? I think many friends are not very clear, today Xiaobian and everyone together to explore the difference between isotropic ferrite and anisotropic ferrite magnets.
What is the difference between isotropic and anisotropic ferrite?
The product of magnetic energy is about three times more anisotropic than isotropic, and the isotropic anisotropy is simpler when fabricated.
How can we tell from the appearance whether it is homogeneous ferrite or heterosexual ferrite?
Appearance does not show. An isotropic magnetic field is applied to the compaction (dry or wet) to align the easy-to-magnetize axes of the magnetic particles.
Sintered anisotropic ferrite ring magnet
How much is Gauss on the surface of isotropic ferrite? How much Gauss can heterosexual ferrite achieve?
The anisotropic ferrite magnets is less than 800 Gauss and the anisotropic ferrite magnets is more than 800 Gauss.
What are the properties and grades for isotropy ferrite magnet?What are the properties and grades for anisotropy ferrite magnet?
Y8T, Y10T are isotropic, Y25, Y30, Y30BH, Y35 grade are anisotropic.
Generally, most of the isotropic properties of ferrite are molded, that is, the disc, and there are also squares. The most obvious thing is that there are R angles around the disc, which is relatively smooth.
Anisotropic ferrite is usually cut, refers to the block class, mostly used in door magnet, reed pipe, equipment.
What are the tolerances of homoferrite and heterosexual ferrite?
Molding: Tolerance of length and width is (+0.02) thickness (+0.1) (unit mm)
Cutting: Tolerance of length and width is (+0.15) thickness (+0.1) per mm.
This article is sorted out by the supplier of courage magnet. Our company has long-term supply of various shapes of ferrite permanent magnets, such as square ferrite magnets, circular ferrite magnets, cylindrical ferrite magnets, and arc ferrite permanent magnets. If you need, you are welcome to inquire.
Relevant articles;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....