0769-23388351
Toggle Navigation
The Hall induction magnetic ring is a kind of ring magnet used with the Hall sensor. What material is the Hall induction magnetic ring generally made of? This is our topic today, read on.
The special Hall induction multi-pole magnetic rings for fixed speed motors and some water pumps are mostly ferrite magnetic rings of the same sex. This ferrite magnetic ring is magnetically stable and has distinct magnetic poles, providing a stable magnetic pole signal for the Hall induction components. , which is widely used in speed measurement.
The main component of the motor Hall induction magnetic ring is a permanent magnet sintered with iron powder and ferric oxide with a trace amount of rare earth components. The Hall induction ferrite magnetic ring is divided into an axial multi-pole magnetic ring and a radial multi-pole magnetic ring , The magnetization method is mainly processed and produced according to the needs of the customer's products. The isotropic permanent magnet ferrite magnet has a special advantage in magnetization. The magnetization orientation can be randomly magnetized according to the setting of the magnetizing fixture, The number of magnetic poles varies from 2 poles to dozens of poles.
The company is a professional manufacturer of motor magnets in China. We can provide arc magnets commonly used in DC motors, sensors and encoders, multi-pole magnetic rings, with experience and many molds. Welcome to inquire!
Columns related to ferrite multipole ring magnets;
Injection Molded Ferrite Magnets
Relevant Hall induction magnets;
Radial 2 pole magnets for Hall induction micromotors 9.5mm OD
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....