0769-23388351
Toggle Navigation
Regarding high-performance NdFeB neodymium permanent magnet materials, I have also introduced some of them one after another. It refers to the sum of intrinsic coercive force (Hcj, kOe) and maximum magnetic energy product ((BH)max, MGOe) greater than 60 Sintered NdFeB permanent magnet material, some netizens are more concerned about its main use, the following is the introduction of Courage magnet manufacturer Xiao Fu to you.
What are the main uses of high-performance NdFeB permanent magnet materials?
High-performance NdFeB materials are mainly used in drive motors of new energy vehicles, wind power generation, energy-saving inverter air conditioners (improving the energy efficiency of air conditioners), energy-saving elevators, and industrial robots (which can enable core components to achieve small weight, fast response, and high performance. Strong short-time overload capacity), permanent magnet direct drive and semi-direct drive wind turbines (with lower operating costs, longer service life, better grid-connected performance, high power generation efficiency, and higher operating efficiency in low wind speed environments) As well as maglev trains, photovoltaics and other fields.
Extended reading;
What are the major producing areas of rare earth permanent magnet materials in China?
NdFeB N50M/H N52 Price Chart (2021.3-2022.8)
Demand for high-performance NdFeB magnets in traditional automobiles
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....