0769-23388351
Toggle Navigation
Circular magnets mainly have holes and no holes. Some netizens asked what is the difference between circular magnets with holes and magnets without holes? Today, courage magnet Xiaofu will give you a brief introduction on this issue.
The main difference between a round magnet with a hole and a hole without a hole is the use, in addition to the price, there are also differences in the magnetic force.
For example, if you need to fix or set the magnet in a certain place, you can choose this kind of magnet with holes. The hole diameter can be processed by the magnet manufacturer according to your actual needs. The size of the magnet with holes has three data, namely outer diameter and inner diameter. , and thickness, a circular magnet without a hole has a diameter and thickness.
In terms of price, round hole magnets are more expensive because of the extra drilling process.
In terms of magnetic force: if the light is from the highest point of magnetic force, the magnetic force of the hole in the middle hole of the perforated magnet is greater than the surface magnetic force of the non-perforated magnet. If compared from the suction force, the suction force will be small because the magnetic area of the hole is reduced.
The above is the introduction of the difference between round magnets with holes and those without holes. If you simply want to fix the magnets, you can also use the method of sticking adhesive on one side of the magnets. Depending on your preference, our company can customize the round magnets according to your needs. Magnet through holes, countersunk holes, small holes, large diameter holes, etc., welcome to consult for quotation.
Relevant round magnets with holes type;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....