0769-23388351
Toggle Navigation
A similar topic about whether a gauss meter can be used to measure the performance and grade of a magnet is often asked by customers. Can a gauss meter be used to determine the grade of a magnet? Today, the magnet supplier courage Xiaofu answered this question.
In fact, it is impossible to accurately determine the grade of the magnet material by measuring the magnetism with a Gauss meter. An experienced technician can make a rough judgment based on experience. If you want to determine the specific grade of the magnet, it is necessary to measure and analyze the demagnetization curve.
Why do you say that?
Various shapes of neodymium arc segmented magnets
1. It is inaccurate to just look at the magnetism of the watch. The results measured by each person are different. Because the placement position and distance may be different, the value may be different. This can only be used as a rough reference. In addition, different brands of Gaussians are measured. results will be different.
2. For magnets of the same performance grade, different specifications, sizes, thicknesses, etc. will cause different Gauss values. Under the same magnet specifications, the thicker the thickness, the greater the surface magnetism (Gauss value) will be.
Therefore, it is generally difficult to judge the material grade of the magnet from the value measured by the Gauss meter, usually by looking at the magnetic flux.
So what can you judge with a Gauss meter?
Gauss meter measuring surface magnetism can roughly judge the quality of magnets. Magnets of the same specification and different performance levels have different surface magnetism. In addition, it can also detect which side of the magnet's N and S poles are and whether it is a multi-pole charger. Magnetic (multiple NS on one face), etc.
The above is the answer to the article on whether a gauss meter can measure the performance level of a magnet, do you understand?
Common magnet problems;
Is there big difference between 2000 Gauss and 3000 Gauss magnets?
Is UH the grade of neodymium magnet? Difference with EH?
Why does the magnet surface magnetism data measured by gauss meter change?
This 1mmx1mm miniature circular magnet has a compact size and a surface magnetic field of approximately 2900 Gauss, making it suitable for precision applications with high requirements for magnet size....
This product is a miniature round magnet, made of rare earth NdFeB magnets, belonging to the ultra-small size magnet series, using N35 grade, the specific size is 1.5mm diameter, 1mm thickness, axial magnetization, surface nickel coating, tolerance ±0.05, such as If you are interested in this small magnet product, you can contact us to customize it for you....
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...