0769-23388351
Toggle Navigation
Everyone is familiar with ferrite magnet. It is divided into isotropy and anisotropy. According to different molding processes, anisotropic ferrite can be divided into dry pressing and wet pressing. Magnetism is mainly divided into two types: barium ferrite (BaO 6Fe2O3) and strontium ferrite (SrO 6Fe2O3). Let's introduce the directionality, characteristics and magnetic properties of barium ferrite and strontium ferrite.
Comparison of magnetic properties of barium ferrite and strontium ferrite
In recent years, due to environmental and health reasons, barium ferrites have been discontinued, and strontium ferrites are currently on the market.
The main uses of barium ferrite and strontium ferrite;
Permanent magnet ferrite products are mainly anisotropic series, they are especially suitable for permanent magnets for small generators and motors, and can replace AlNiCo permanent magnets for making permanent magnet ignition motors, permanent magnet motors, permanent magnet concentrators , permanent magnet lifting head, magnetic thrust bearing, magnetic separator, speaker, microwave device, magnetic therapy tablet, hearing aid, etc.
The above is about the application of barium ferrite and strontium ferrite and the comparison of magnetic properties. The information is organized on the Internet. Thank you for your attention.
Content related articles;
What is the hardness of ferrite magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....