0769-23388351
Toggle Navigation
If you are concerned about whether there are magnets that are more resistant to impact and not so easily broken, today the Courage magnet manufacturer will answer this question with you.
Which is the most impact-resistant magnet?
Relatively impact-resistant magnets include rubber magnetic strips/sheets, injection-molded ferrite magnet (with nylon components), and iron-chromium-cobalt permanent magnets.
Those like sintered strong magnetic NdFeB magnets, ferrite black magnets, samarium cobalt permanent magnets, and alnico magnets are relatively easy to break and fall off during transportation or use. Like many users, most of the NdFeB magnets are strong. If you want to be more resistant to impact, the thickness is too thin. You can only increase the thickness of the magnet, at least 3mm or more, so it is not so easy to break.
It should be noted that if neodymium iron boron is selected, its magnetism may be weakened or even disappear after being strongly impacted. If neodymium magnet wants to be wear-resistant, corrosion-resistant and not fragile, it can be made into plastic coating, that is, glue coating treatment can be carried out on the outside of the magnet.
The above is the introduction about the impact resistance of magnets. Customers who need to buy magnets remember to contact us!
Relevant plastic coated magnets;
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....