0769-23388351
Toggle Navigation
Our company has been doing foreign trade for more than 2 years. During this time, I found that there are still many inquiries about neodymium magnets. The advantages of choosing more are explained. The advantages are still quite big. Today, this article will introduce the advantages of strong neodymium magnets. and shortcomings.
First, let's talk about the advantages;
1、NdFeB permanent magnet material is a permanent magnet material based on intermetallic compound Nd2Fe14B, which has extremely high magnetic energy product and coercive force, and the advantages of high energy density make NdFeB permanent magnet material in modern industry and electronic technology. It has been widely used, which makes it possible to miniaturize, lighten, and thin equipment such as instruments, electroacoustic motors, and magnetic separation and magnetization.
2、Strong magnetic force, it is the strongest magnetic material at present, and it is widely used and cost-effective.
3、With good mechanical properties, it can be easily processed into various shapes, including special-shaped magnets.
4、Cost-effective
5、High precision, tolerance can be controlled to ±0.02mm
Disadvantages of Neodymium Magnets;
1、Curie temperature is low
2、Poor temperature characteristics
3、The surface must be electroplated. Many customers have asked if the surface is not plated? If you don't want to use it and then scrap it, it has to be plated.
4、Fragile. This is the characteristic of a magnet. The stronger the magnetic force, the easier it is to break
The above is an introduction to the advantages and disadvantages of rare earth neodymium magnets. It was originally edited by Karich magnet manufacturers in China. If you have any doubts, please consult.
Related neodymium magnet columns;
I guess you are interested in relevant articles;
Advantages and disadvantages of nickel coating on neodymium magnets
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....