0769-23388351
Toggle Navigation
We will find that many magnets have holes on them, and the common shapes are rectangle, square, circle, arc, etc. Some of them have 1 hole, some have 2 holes, or even more, so how are these holes processed?
The holes on the neodymium magnets are generally processed when they are not magnetized. If they are magnetic, they need to be demagnetized before drilling.
What machine is used to punch holes in neodymium?
Like the general magnet manufacturers, they usually use the bench drilling machine, which mainly drill (punch), enlarge and lower the hole of the magnet. Of course, if you want to drill holes yourself, you can also try using a vibrating diamond grinding wheel drill.
What are the types of magnet punching?Usually, the magnets are mainly punched with countersunk holes, and there are also straight holes. The processing method of the countersunk hole ring magnet is to drill or drill again after slicing, and the processing technology is more demanding.
Our company (Courage) undertakes various processing and customization of perforated neodymium magnets, biased hole strong magnets, side perforated magnets, and high-precision countersunk hole magnets. If you need it, please contact us.
Relevant punch magnet columns;
This 1mmx1mm miniature circular magnet has a compact size and a surface magnetic field of approximately 2900 Gauss, making it suitable for precision applications with high requirements for magnet size....
This product is a miniature round magnet, made of rare earth NdFeB magnets, belonging to the ultra-small size magnet series, using N35 grade, the specific size is 1.5mm diameter, 1mm thickness, axial magnetization, surface nickel coating, tolerance ±0.05, such as If you are interested in this small magnet product, you can contact us to customize it for you....
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...