0769-23388351
Toggle Navigation
Today, I saw an interesting question asking if there are grades weaker than N35 magnetic steel. I think many friends would like to know the answer, perhaps because of the price, or perhaps because the magnetism is a bit too strong and they want to reduce it. Today, Mr. Fu from the magnetic steel manufacturer NST will answer this question for everyone.
Are there any magnetic grades with weaker performance than N35?
The answer is yes. There are grades with lower performance than neodymium iron boron N35, such as N33, N28, and N25. These magnets, due to the use of inferior materials, are prone to magnetic instability. They are primarily used in applications where magnetic strength is not a critical requirement, such as packaging handbag factories and scenarios where magnetic strength is not highly demanded. For example, as the Mid-Autumn Festival approaches, the demand for mooncake boxes increases significantly. In such cases, the magnetic properties of the magnets are not a priority, and many are single-use items. For manufacturers, this allows them to save a significant amount of costs on magnets alone—why not take advantage of it?
The accompanying image shows a 1/2-inch neodymium cube magnets.
Here, we would like to clarify that our company's positioning is mainly focused on high performance, high precision, and high difficulty. Our main customers are also in the fields of motors, sensors, optics, etc. Therefore, we do not produce grades lower than N35 and do not provide a quotation. This article is only to solve the customer's question. If you need neodymium iron boron suppliers with lower performance grades, you can search for them online.
The above is an introduction to whether there are grades and grades with weaker magnetism than n35. We hope it can be helpful to you!
Related articles;
Neodymium round magnets with a diameter of 5mm and a thickness of 4mm are more commonly used. If you feel that the magnetic force is not enough, the performance level can be appropriately improved. Welcome to consult the price!...
Our company is a permanent magnet supplier from China. We are good at processing micro-precision magnets, high-performance magnets, special-shaped magnets, and multi-pole ring magnets. The quality is guaranteed and the price is not expensive. We look forward to customer consultation from all over the world....
The sample is an N52 high-performance ultra small hole radially sintered neodymium rotor magnet, with specifications of 2mm outer diameter, 0.9mm bore, and 4.5mm height....
This is a square neodymium magnet for earphones, the length and width are 5mm, the thickness is 2mm, the thickness is magnetized, the surface is galvanized, 1mm or other thickness can also be selected, non-high temperature grade, the maximum working temperature is less than 80 ℃...
The sample is a high-performance ferrite rotor magnet with a radial 3-pair pole configuration (6 poles), measuring 20mm in outer diameter, center bore diameter of 8mm, and height of 27mm. surface magnetic flux density reaches approximately 1800 Gauss....
This is a small-sized short bar shaped neodymium iron boron strong magnet with a specification of 1.5 × 1.5 × 10mm. It is made of N42 performance grade neodymium iron boron material and magnetized along the length direction (10 mm direction)....
This is a rare earth NdFeB strong magnet with a length of 30mm, a width of 20mm and a thickness of 10mm. Surface treatment is nickel-copper-nickel, and the thickness is 10mm. Magnetization direction is length direction....
This product is a small rare earth NdFeB magnet ring, with gold plated surface, N52 grade, the magnetization method is axial, the size is 5mm outer diameter, 2mm inner hole, 2mm height, and the tolerance can be ±0.02mm. Welcome to consult us for the price....