0769-23388351
Toggle Navigation
Some customers call that kind of surface magnetic strength of the magnet is very high called high gauss magnet, this description is in fact not very accurate, because the magnet gauss value of its pull is not necessarily large, there are a lot of factors, you can go to this article magnet gauss vs pull strength to learn more.
High Gauss magnet is not the official name of a certain type of material, but a common name in the market for magnets with high remanent magnetism (Br) or high surface flux density, usually using high grade (N50,N52) NdFeB material, with a surface magnetic field strength of more than 4000 Gauss.
High gauss magnet size is not necessarily large
Advantages of high Gauss magnets;
1. The use of high Gauss magnets in devices such as motors, generators, and speakers can increase magnetic flux density, thereby enhancing energy conversion efficiency, reducing energy consumption, and improving overall system performance.
2. Due to its strong magnetic force, high Gauss magnets can achieve "small volume, large suction force", making the equipment more compact and lightweight. This is particularly important for products with limited space such as smart wearables, micro motors, and medical devices.
3. In magnetic sensor or Hall element applications, high Gauss magnets provide stronger magnetic field changes, enabling the system to respond faster and more accurately.
It is important to note that high gauss magnets are not required in all situations. Although high flux density brings stronger suction and energy efficiency, it also means stronger magnetic interference and higher cost. Therefore, the use of high gauss magnets should be evaluated in light of the specific application scenario, temperature environment, magnetic circuit design and cost budget.
High Gauss magnet samples;
Strong magnetic cylinder magnet OD 9.5 x 10mm 5000 Gauss
Guess you might want to know;
Recommended size for surface 5000-5999 gauss magnets
How does the magnet Gauss value correspond to the grade?
What are the factors that affect the Gauss value of a magnet?
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....