0769-23388351

2 inch rare earth magnets [type shape appliance]

Addtime:2025-03-19 10:37:26 Click:624

Not only 1-inch magnets are popular, 2-inch magnets are also often used by customers. Today, this article will introduce 2-inch rare earth magnets in many ways, including types, shape types, and purchasing suggestions.   


2-inch rare-earth magnet (about 50.8 mm) usually refers to a strong magnetic material made from rare-earth elements, mainly including two types of neodymium-iron-boron (NdFeB) and samarium cobalt (SmCo).


Picture of a 2-inch round neodymium magnet

2-inch round neodymium magnet


In these 2 kinds of rare earth magnets, neodymium material is more magnetic, but poor temperature resistance, samarium cobalt material has less magnetic energy than neodymium, but good temperature resistance and strong corrosion resistance.


2-inch rare earth magnets in common shapes;

Disc magnets (standard disc shape)

Ring magnets (with hole in the center for mounting)

Square/Rectangular Magnets (for specific equipment installations)

Arc magnets (commonly used in motors and generators)


2-inch rare earth magnets Main applications;

It is widely used in the fields of motors and generators, industry and manufacturing, magnetic levitation and transportation, defense and aerospace, research and education, electronics and consumer products.


Buying Advice;

First of all, you need to confirm the application environment, if there is a high magnetic force in the room temperature environment need to choose neodymium iron boron, more than 200 degrees Celsius above the high temperature environment choose samarium cobalt.

As for plating, nickel plating is wear-resistant, epoxy resin can insulate, gold plating is suitable for decoration and luxury goods.

Adsorption of flat objects suggested round, need to fix or through some parts suggested ring, such as countersunk holes, through-hole type.

Square rectangle can provide larger contact area. Special processing is also available to fit the application.


Above is some introduction of 2 inch rare earth magnets, our company is neodymium magnet manufacturer, can customize 2 inch rare earth magnets of various specifications and shapes for you, welcome to consult the price.


Related 2-inch rare earth magnets sample;

2 inch long block bar thin neodymium magnets 51.5x5x1.3mm

2 Inch Diameter Neodymium Magnets Round 50x5mm (2"x3/16")

50mm x 5mm x hole 40mm N38 neodymium magnet ring 2"

Tags:
MAGNET PRODUCT RECOMMENDATION

Tiny Ferrite Magnet Block Length magnetization 1x1x2.45mm

This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....

Small Ceramic Ferrite Block Magnet 7.4mm x 6mm x 5mm

7.4x6x5mm Ferrite Small Block Magnet Introduction,Material: Hard Ferrite (Ceramic),Shape: Block / Rectangle / Bar,Coating: No Coating,Grade (Chinese Stardard): Y30,Operating temperature: -40°C to 250°C,Delivery time: 7-15 days,Magnetization direction: thickness....

U shaped ndfeb magnets in the shape of the letter U

U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....

4 pole bonded ndfeb ring rotor magnet 16 x 5 x 20 mm

This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...

4 pole ring Injection magnet for pushrod motors 22 x 7 x 4 mm

This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...

Encoder radial 2-pole circular magnet 6x2.5 10x2.5 N35

This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....

1.5mm small inner hole multipole injection ferrite magnet ring

This product is a multi pole magnetic ring with an inner diameter of 1.5mm. The material is injection molded ferrite. It adopts axial multi pole magnetization and is mainly used for DC motors. If you have a sample of similar injection molded magnetic products, please contact us for quotation....

Tiny block neodymium magnet with zinc coating 1.5mm x 1.5mm x 3mm

This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....

WHAT ARE YOU STILL HESITATING? CONTACT US NOW!

CONTACT NOW