0769-23388351
Toggle Navigation
NdFeB magnet is the most widely used magnetic material, is also the most inquiries in our website, it is divided into ordinary temperature-resistant and high-temperature-resistant grade, today we mainly introduce high temp neodymium magnets.
High temperature neodymium magnets refer to NdFeB magnets that can work stably in high temperature environments and have excellent magnetic properties. Compared with ordinary NdFeB magnets, they have better demagnetization resistance and are suitable for applications with high temperatures or large temperature fluctuations.
Common Shapes of High Temperature neodymium Magnets - Arc Shape
Characteristics of high temperature neodymium magnets;
Higher temperature resistance: the maximum working temperature of ordinary NdFeB is generally 80℃-150℃, while high-temperature NdFeB can withstand 180℃-220℃ or even higher.
Higher coercivity: special formula (e.g. adding rare earth elements such as cobalt, dysprosium, terbium, etc.) is used to enhance magnetic stability, which is not easy to demagnetize under high temperature environment.
High energy density: still maintains a high magnetic energy product (BHmax), suitable for applications requiring high magnetic field strength.
Technical principles for realizing high temperature performance of NdFeB:
1. Addition of heavy rare earth elements (Dy, Tb)
2. By coating the magnet surface with compounds containing Dy, Tb and diffusing them to the grain boundaries at a certain temperature, the effect of increasing the coercivity at low cost without significantly reducing the remanent magnetization (Br) is achieved.
3. Refine the Nd₂Fe₁₄B main-phase grains and improve the high-temperature stability of the magnets by using processes such as rapid solidification, aerosolized powder, and hot isostatic pressing (HIP).
4. Construct a dual-phase structure of Nd-rich and Fe-rich phases in the magnet to enhance the antimagnetization capability at high temperatures through the synergistic effect between the phases.
How to choose high temperature neodymium magnets?
Determine determine the required temperature resistance level, such as 150°C, 180°C or 200°C or more.
Requirements for magnetic performance, such as the recent release of BYD's super 30,000 rpm drive motor selected N50EH grade.
High temperature environment is easy to oxidize, it is recommended to choose nickel plating + epoxy or Parylene coating.
The above is the introduction of high temperature neodymium magnets, if your company needs to buy high temperature neodymium magnets, or super 300 ℃, 400 ℃ permanent magnets, you can send us an inquiry.
Related high temperature resistant permanent magnets:
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 4-pole ring (Hollow cylinder) magnet, the material is bonded NdFeB, with high magnetic performance, the size is 16mm outer diameter, inner hole 5mm, height 20mm, surface gray epoxy treatment, suitable for water pump motor...
This product is a 4-pole ring magnet, injection-molded ferrite material, the sample size is 22mm outer diameter, 7mm inner diameter, 4mm thickness, 2 N poles and 2 S poles, mainly used for push rod motors, magnetic induction devices, encoders, etc.,...
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....