0769-23388351
Toggle Navigation
30mm length neodymium block magnet introduction;
This is a length of 30mm, width and thickness of 10mm NdFeb block magnet, the surface is plated nickel copper nickel treatment, thickness direction magnetization, according to the different use of customers, some customers may need length or width magnetization, this is no problem, we can according to the direction of magnetization you need, you do not know our customer service will communicate with you to confirm.
30 x 10 x 10 mm neodymium block magnet magnetization schematic diagram;
30x10x10mm neodymium bar magnets are suitable for all kinds of magnetic devices. You can choose from N35-N52 and high temperature resistant material grades. Please send us an inquiry if you need a favorable price.
Other 30mm neodymium block strong magnets;
Length 30mm neodymium block magnet N52 30 x 15 x 14 mm
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
You need to buy small magnets with holes. Welcome to the Courage Magnet Factory in China. We can customize small magnets with through holes (straight holes) or countersunk holes for you. You can choose NdFeB or other weak materials. The magnetic performance is generally above 3000 Gauss. If you need to know its price, please send us an inquiry, thank you!...
This sample is a magnet with a thickness of 12mm, the material is strong NdFeB magnet, the thickness is magnetized, and the surface is galvanized. You can also choose radial magnetization, depending on your needs, the specific size is 6mm in diameter, 12mm in height and thickness....
This sample is a magnet with a diameter of 9mm and a thickness of only 1.5mm. It belongs to the series of thin and strong magnets. It is provided by the NST magnet manufacturer in China....
If you're looking for ultra-thin round magnets in stock, check out this model: 20mm in diameter and 0.5mm thick (20x0.5mm),...
This product is an industrial mounting magnet, made of the strongest neodymium magnets, square in shape, punched with countersunk screw holes to mount where it is needed, these powerful mounting magnets are typically used to lift and hold magnets, including magnetic tool holders , component lifters, clips, latch magnets, universal magnetic racks, etc....