0769-23388351
Toggle Navigation
Brand: Courage Magnet
Name: Countersunk hole strong magnet for handicrafts crafts
Material: rare earth neodymium magnetic material
Size: Diameter 12mm, thickness 5mm, countersunk hole 4mm
Grade: N35 grade
Tolerance: ±0.05mm
Magnetization direction: Thickness magnetization
Operating temperature: up to 80 degrees Celsius
Product features: The magnet is not iron (the material is similar to a stone), hard and brittle, fragile, do not hit do not fall
Coating process: nickel copper nickel (three-layer electroplating process, anti-rust and anti-corrosion)
Note: NdFeB strong magnets are sintered from powdered rare earth raw materials, which are fragile and have very strong magnetic force. It is forbidden for people under 14 years old to use them alone. Please use them carefully to avoid pinching your fingers.
The shape and size are close to the magnet;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
U-shaped neodymium magnets are a type of high-performance permanent magnet material with a structure resembling the letter ‘U’. Manufactured from sintered neodymium-iron-boron, they are characterised by high magnetic energy product....
This is a radial 2 pole circular magnet designed specifically for magnetic encoder chips. It is made of sintered neodymium-iron-boron with N35 grade performance and is suitable for standard environments....
This is a very small size rectangular block magnet with galvanized surface, 3mm length, 1.5mm width and height, with very fine tolerance, magnetized by lengthwise direction, mainly used in precision electronics, instrumentation, please contact us if you need to buy....
You need to buy small magnets with holes. Welcome to the Courage Magnet Factory in China. We can customize small magnets with through holes (straight holes) or countersunk holes for you. You can choose NdFeB or other weak materials. The magnetic performance is generally above 3000 Gauss. If you need to know its price, please send us an inquiry, thank you!...
This sample is a magnet with a thickness of 12mm, the material is strong NdFeB magnet, the thickness is magnetized, and the surface is galvanized. You can also choose radial magnetization, depending on your needs, the specific size is 6mm in diameter, 12mm in height and thickness....
This sample is a magnet with a diameter of 9mm and a thickness of only 1.5mm. It belongs to the series of thin and strong magnets. It is provided by the NST magnet manufacturer in China....
If you're looking for ultra-thin round magnets in stock, check out this model: 20mm in diameter and 0.5mm thick (20x0.5mm),...
This product is an industrial mounting magnet, made of the strongest neodymium magnets, square in shape, punched with countersunk screw holes to mount where it is needed, these powerful mounting magnets are typically used to lift and hold magnets, including magnetic tool holders , component lifters, clips, latch magnets, universal magnetic racks, etc....