0769-23388351
Toggle Navigation
This is a neodymium magnet with a diameter of 12mm. What sets it apart from other neodymium magnets is its coating. The magnet is coated with black nickel, which has a charcoal or bronze glossy appearance. Adding black dye during the final nickel plating process of triple nickel-copper-black nickel, it is not completely black like the epoxy coating and still shiny, much like a normal nickel-plated magnet, It is often used in some industries with special requirements such as optical instruments and photographic equipment..
The main components of the black nickel layer are nickel, zinc, sulfur and carbon. Among them, nickel is the main component, and the nickel content is about 40%~60%, followed by zinc, the zinc content is about 20%~30%, and the sulfur content is about 20%~30%. It is 10%~15%, and the total amount of carbon and organic matter accounts for about 10%. With the different process specifications, the relevant components in the coating will be greatly different, and the color of the coating surface will also be greatly changed.
The black nickel coating is dark black, but with the difference of the previous treatment process, it can obtain true black and bright black. The layer should not be too thick, otherwise the brightness will be reduced.
After black nickel plating, brushing can also obtain a matte black decorative surface with different textures.
For decoration, black nickel plating solution can be used to electroplate black nickel on the surface of copper plating, silver plating and nickel plating, which has a special decorative effect and presents a colorful appearance. After plating, brush with copper wire or finely polish with a small cloth wheel. You can also use rolling method to obtain more color sets, which are both elegant and beautiful decorative coatings. These process methods have been widely used in clothing. application.
If you are interested in strong magnets with this coating, you can contact us to provide you.
Other 12mm diameter magnets;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This product is an industrial mounting magnet, made of the strongest neodymium magnets, square in shape, punched with countersunk screw holes to mount where it is needed, these powerful mounting magnets are typically used to lift and hold magnets, including magnetic tool holders , component lifters, clips, latch magnets, universal magnetic racks, etc....
This sample is a square magnet with 2 countersunk holes (screw holes), the material is the strongest NdFeB, N45 grade, magnetized in the thickness direction, it is a customized magnet, it can be installed with screws where it is needed, strong mounting magnet except square, you can also choose rectangle, bar, circle, size, performance grade you can choose...
In addition to buying magnets from lowes magnets and home depot, you could also choose our Chinese magnet manufacturer to make an inquiry and buy in large quantity. This 4.5x4.5x0.5mm magnet is a thin square magnet, which uses the high performance N52 grade of Neodymium Iron Boron to give it a strong magnetic force...
Note that this is a thin ring neodymium magnet with radial magnetization. Most of the other powerful ring magnets of similar specifications you have seen are axial, so this is a special one. The outer diameter of the magnetic ring is 27mm, the same as the size of the commemorative coin, the inner diameter is 17mm, and the thickness is 1mm. The following picture is taken by Xiao Fu, the courage magnet manufacturer....
This sintered neodymium magnet radial magnetic ring has an outer diameter of 48 mm and dimensions of 48 x 40 x 2.5 mm. It is made from high-performance rare earth materials and offers excellent magnetic performance and stability....
This 6x2x2.5mm ring-shaped neodymium magnet is designed using a diameter-direction magnetization (radial magnetization) process, featuring a unique magnetic field distribution, making it ideal for high-precision magnetic sensing and sensor applications....
This product is a rectangular magnet with countersunk screw holes made of sintered NdFeB. The size is 25mm long, 13mm wide and 3mm thick. It is N35 grade. If it is not the same as what you want, we can also directly process it according to your size without expensive mold costs, welcome to consult....
The sample is a round thin magnet with adhesive backing, with adhesive backing, the magnet material is NdFeB, the appearance is silvery white, and it is mainly axial magnetization. Our company can adjust the shape, size and performance of the magnet according to your actual requirements. , The type of adhesive can be customized, welcome to consult....