There were 50x50x25mm ferrite magnets without holes uploaded before, and today's one is the same size. But there is a circular through-hole in the middle, with Y30 grade, strong magnetism, and the maximum working temperature of 250 ℃. It is suitable for industrial and mechanical equipment. Customers interested in this product are welcome to send us inquiries.
Note: Our company is a direct selling manufacturer of magnets, which can provide you with thin, flat, large, small and special shaped ceramic ferrite magnets. The products are environmentally friendly, non-toxic, and have advantages in price. We look forward to cooperating with you!
Relevant large square ferrite magnets;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
This product is a square ceramic magnet, made of sintered ferrite anisotropy, with low remanence, low recovery magnetic permeability, and strong anti-demagnetization ability. 12mm, suitable for fitness equipment, massager, magnetic control machine, air pump, if you are interested in this product, please contact....
You are now viewing this is a super small (tiny) size ferrite block magnet sample, high performance grade Y30, magnet length 2.45mm, width and thickness are 1mm, magnetization direction along the length....
This product is a variety of isotropic ferrite (Y10) rotor magnets ring, which are processed and manufactured by the Chinese permanent magnet supplier Courage Magnet. The inner aperture size of the magnet is 5.4mm, and the surface is smooth and free of defects. It can be magnetized according to the number of magnetic poles required by customers, such as radial 2, 4, 6, and 8 poles...
This product is a float switch magnet, a float ring magnet, and the material is ferrite. Drinking system, etc.), industrial equipment (such as: air oil compressor, air cooler, drain, lubricating oil system), gardening equipment, medical equipment, beauty salon equipment, aquaculture and industrial water purification, sewage treatment system, automatic door control system, Automotive and other industries....
This product is a cut ferrite square magnet, rectangular, Y30BH grade, side magnetized, mainly used for door sensor alarms, dry yellow tubes, the size is 25mm in length, 9mm in width, and 7mm in thickness. If you need this sample or want To understand the price, please send us an inquiry....
Note that this is not a NdFeB magnet. From the outside, it is indeed the same as a neodymium magnet, but in fact it is made of ferrite with a coating on the surface for magnetic therapy, such as knee pads, waist pads, neck pads, shoes, Pillow can be used, the picture below shows its magnetic force, the highest is about 800 Gauss....
This product is a ferrite magnet with a counterbore. The difference from ferrite ring magnets is the hole in the middle. The counterbore is mainly used with screws. Due to magnetism and processing problems, most of them choose neodymium iron. Boron counterbore instead, if you need to buy this counterbore ceramic magnet, welcome to communicate with us....
This product is a square ceramic ferrite magnet, magnetic grade is Y30, size is length 50mm, width 50mm, thickness 25mm, thickness direction magnetization. The place of production is Dongguan, China. It is mainly used for industry, machinery and equipment, and personal experiments, if you need it Please contact us to purchase this magnet, the minimum order quantity is 10 pcs....