0769-23388351
Toggle Navigation
This is a relatively large ring magnet, made of sintered ferrite, with an outer diameter of 220mm, a middle hole of 110mm and a thickness of 20mm. Compared with neodymium magnets, it has a high cost performance ratio and greater scope of work. It can be used in experiments, industry, mechanical equipment, electroacoustics and other fields. You are welcome to consult with the Courage magnet manufacturer (in China) about the price. There is a certain price advantage in purchasing from us.
220 x 110 x 20 mm annular ring ferrite suction test;
We are a real ferrite magnet factory, any shape and size can be customized, can be processed into large, can also be processed into very thin, look forward to your inquiry.
Other relatively large annular ferrite sizes;
Ferrite grade, sintered ferrite magnetic property parameter table
NdFeB magnet grade, Sintered neodymium magnet performance grade parameter table
Neodymium(Ndfeb) Magnet Material Safety Data Sheet
Sintered Ferrite Material Safety Data Sheet Pdf
Magnetic properties grade parameters of smco rare earth magnets
Customers from the United States, the United Kingdom, Australia, Japan, Poland and other customers are looking for ferrite cylindrical magnets. Welcome to contact the Courage magnet manufacturer. Our company is located in Dongguan, China. There are many ready-made sizes and low prices. Like the main picture...
The sample is a small-sized Y35 ferrite magnetic block with a specification of 3 × 1.3 × 4mm, magnetized along the length direction, and a surface magnetic field of about 1300 Gauss....
This is a very small rectangular ferrite block magnet, measuring 2.45 mm in length and 1 mm in both width and height. It is magnetised along its length and is barely noticeable when held in the hand....
7.4x6x5mm Ferrite Small Block Magnet Introduction，Material: Hard Ferrite (Ceramic)，Shape: Block / Rectangle / Bar，Coating: No Coating，Grade (Chinese Stardard): Y30，Operating temperature: -40°C to 250°C，Delivery time: 7-15 days，Magnetization direction: thickness....
Have you ever seen such a small ferrite rectangle/block magnet? This is a ceramic ferrite magnet of 2mm in length, 1.5mm in width and 2mm in thickness, with black surface and Y30BH grade. It is suitable for all kinds of electronic parts, precision electronics and medical products requiring magnetism. If you are processing small, thin and flat ferrite permanent magnet suppliers, we will be a good choice for you....
This ferrite ring magnet is manufactured using high-temperature sintering technology, featuring an outer diameter of 8mm, a 3mm square center hole, and a thickness of 3mm....
To buy round ferrite magnets, welcome to contact Courage permanent magnet manufacturers in China, our company has many sizes of ceramic round, block, arc, hole ferrite magnets, factory direct sales, low price, welcome Inquiries from customers all over the world....
This is a radial 2-pole ferrite rotor magnet, the outer diameter is 9mm, the height is 10.4mm, the inner hole is oval, it has low cost, high temperature resistance, and the maximum surface magnetic field strength is about 1130 Gauss. Welcome to consult the sample and price....